| 一般特性： |
| Detection type |
photoelectric sampling |
| Device type |
Multiturn absolute encoder |
| 功能安全性參數： |
| MTTFd |
70 a |
| Mission Time (TM) |
20 a |
| L10h |
1.9 E+11 at 6000 rpm and 20/40 N axial/radial shaft load |
| Diagnostic Coverage (DC) |
0 % |
| 電氣特性： |
| Operating voltage |
10 ... 30 V DC |
| No-load supply current |
max. 230 mA at 10 V DC
max. 100 mA at 24 V DC |
| Power consumption |
max. 2.5 W |
| Time delay before availability |
< 1000 ms |
| Linearity |
± 2 LSB at 16 Bit, ± 1 LSB at 13 Bit, ± 0,5 LSB at 12 Bit |
| Output code |
binary code |
| Code course (counting direction) |
programmable,
cw ascending (clockwise rotation, code course ascending)
cw descending (clockwise rotation, code course descending) |
| 接口： |
| Interface type |
PROFIBUS |
| Resolution |
|
| |
Single turn |
up to 16 Bit |
| |
Multiturn |
14 Bit |
| |
Overall resolution |
up to 30 Bit |
| Transfer rate |
0.0096 ... 12 MBit/s |
| Standard conformity |
PNO profile 3.062, RS-485 |
| 連接： |
| Terminal compartment |
in removable housing cover |
| 符合標準： |
| Degree of protection |
DIN EN 60529, IP65
IP66 (with shaft seal) |
| Climatic testing |
DIN EN 60068-2-30 , no moisture condensation |
| Emitted interference |
EN 61000-6-4:2007 |
| Noise immunity |
EN 61000-6-2:2005 |
| Shock resistance |
DIN EN 60068-2-27, 100 g, 6 ms |
| Vibration resistance |
DIN EN 60068-2-6, 20 g, 10 ... 2000 Hz |
| 許可和認證： |
| UL approval |
cULus Listed, General Purpose, Class 2 Power Source |
| 周圍環(huán)境： |
| Operating temperature |
-40 ... 85 °C (-40 ... 185 °F) |
| Storage temperature |
-40 ... 85 °C (-40 ... 185 °F) |
| 機械特性： |
| Material |
|
| |
Combination 1 |
housing: powder coated aluminum
flange: aluminum
shaft: stainless steel |
| |
Combination 2 (Inox) |
housing: stainless steel
flange: stainless steel
shaft: stainless steel |
| Mass |
approx. 600 g (combination 1)
approx. 1200 g (combination 2) |
| Rotational speed |
max. 12000 min -1 |
| Moment of inertia |
30 gcm2 |
| Starting torque |
≤ 3 Ncm (version without shaft seal) |
| Tightening torque, fastening screws |
max. 1.8 Nm |
| Shaft load |
|
| |
Angle offset |
± 0.9 ° |
| |
Axial offset |
static: ± 0.3 mm, dynamic: ± 0.1 mm |
| |
Radial offset |
static: ± 0.5 mm, dynamic: ± 0.2 mm |
在線客服
企業(yè)微信
點擊圖片查看原圖
[VIP第5年] 指數:8
